Electrical Panel Upgrade in Point Loma, CA | Landers Electric
With nearly 20 years of electrical experience, Landers Electric specializes in reliable electrical panel upgrades in Point Loma, CA, serving the greater San Diego area including Ocean Beach, Liberty Station, Shelter Island, and surrounding neighborhoods. Our licensed electricians handle everything from 100 to 400 amp service upgrades to Zinsco and Federal Pacific breaker box replacements and SDG&E permit coordination. Homeowners and businesses in Point Loma trust Landers Electric for safe, NEC and CEC code-compliant installations done right the first time.
Looking For an Electrical Panel Upgrade in Point Loma, CA?
Look no further!
Landers Electric specializes in upgrading electrical panels throughout Point Loma and the surrounding San Diego area.
Whether your electricity is fed from above your house or underground, we can help you through the entire process.
The goal of this page is to help you understand why you might need an electrical panel upgrade in Point Loma and what to expect during the panel upgrade process.
It is important to know that electrical panel upgrades are extremely technical and dangerous and should never be performed by an untrained individual.
The information contained on this page is strictly informational.
When hiring an electrical contractor in Point Loma, always verify their contractor license status and confirm that they carry a general liability insurance policy.
Electrical Panel Upgrade for Electric Vehicle (EV) Charger Installation in Point Loma
Many electric vehicle (EV) chargers require a dedicated 40 to 60 amp breaker. If your current electrical panel in Point Loma does not have the capacity or available space, you may need a panel upgrade before installing a charger. This is one of the most common reasons Point Loma homeowners call us for panel replacements.
When it comes to EV chargers, our experience shows that a hardwired unit is more reliable and safer than a plug-in model. Hardwiring reduces outlet wear and ensures the charger operates at its full capacity without interruptions.
Planning to install an EV charger in Point Loma? In most cases, we can determine what size panel you need and provide a quote with just a phone call. 📞 Call Landers Electric today at (760) 690-7517 or Text Us Anytime. We will check your panel's capacity, handle the permits, and make sure your upgrade is done safely.
Need help with your electrical panel upgrade? Call us today for a free quote over the phone!
Do You Need an Electrical Panel Upgrade in Point Loma?
Below are a few reasons you might need an electrical panel upgrade or replacement:
Breakers keep tripping
Melted bus bar from a faulty circuit
A burning smell is coming from the electrical panel
The electrical panel is deteriorating
More amperage is needed for added loads such as an electric vehicle, oven, fireplace, heat pump, or mini-split
These are a few of the many reasons Point Loma homeowners and businesses consider upgrading their electrical panel.
Is There an Advantage to Upgrading My Electrical Panel in Point Loma?
In short, yes.
Many people buy a home in Point Loma and spend their money on strictly cosmetic upgrades. One thing to keep in mind, especially with electrical upgrades, is the importance of the backbone of your electrical system.
The backbone consists of all the wires and materials you cannot see, with the electrical panel being the main component.
It is not the most glamorous upgrade. It is not going to impress your friends or make your bathroom look modern and up to date. However, a properly operating electrical panel will ensure that all the new light fixtures, smart switches, ceiling fans, and other components you install continue to operate without interruption for many years to come.
Need help with your electrical panel upgrade? Call us today for a free quote over the phone!
What Size Electrical Panel Do I Need in Point Loma?
Electrical panels are sized in amps. The panel you choose will vary depending on your electrical needs today and your plans for the future.
1. 125 AMP Electrical Panel Upgrade or Replacement
You are not adding any electrical load and simply want to replace your existing panel
Your 100 or 125-amp electrical panel is damaged and needs replacement
You have an underground-fed electrical panel and do not have the budget for a 200-amp upgrade
2. 200 AMP Electrical Panel Upgrade or Replacement
You are not adding any electrical load, but have plans to do so in the future
You are looking to add one or two electrical appliances and one EV charger
You are installing a larger capacity photovoltaic (solar) system
3. 400 AMP Electrical Panel Upgrade or Replacement
You need a 400-amp panel replacement
You are installing two EV chargers and have many other electric appliances in the home
You are looking to fully electrify your home
Not sure what size panel is right for your Point Loma home? Give us a quick call. 📞 (760) 690-7517 or Text Us Anytime and we will size it for you over the phone.
How Much Does an Electrical Panel Upgrade Cost in Point Loma, CA?
The cost of upgrading your electrical panel in Point Loma can vary depending on your specific installation requirements.
Below are the two most typical cost ranges in the Point Loma and greater San Diego area:
Overhead Service (Power lines above your house with a service drop connecting to your electrical panel) $3,500 to $5,500
Underground Service (No power lines above; electrical panel fed underground) $7,000 to $20,000
The Electrical Panel Upgrade Process in Point Loma, CA
Now that we have covered the basics, here is what to expect from start to finish, including the differences between overhead and underground electrical panel upgrades in Point Loma.
Electrical Panel Upgrade Process Overview
Request Service Change From SDG&E (San Diego Gas and Electric)
Waiting Period
Apply For a City Permit (City of San Diego)
Schedule Pre-Meet With Trench Inspector (Underground Service Only)
Dig Trench and Install Conduit (Underground Service Only)
Trench Inspection and Backfill (Underground Service Only)
Schedule Disconnect and Reconnect
Utility Company Power Disconnection
Install Grounding and Bonding System
Electrical Panel Removal and Installation
Repair Stucco or Siding
Pass Final Inspection
Step 1: Request Service Change From SDG&E
To get your project started in Point Loma, you must first request a change to your existing service from SDG&E (San Diego Gas and Electric), the local utility company serving Point Loma and all of San Diego.
Steps to complete this:
Go to SDG&E's work order request form at sdge.com/apply-service
Fill out all the necessary information for your installation
Review all the forms and click submit
This paperwork is typically included in the cost of your electrical panel upgrade. When you hire Landers Electric, there is no need to fill out any of the paperwork yourself.
Step 2: Waiting Period
Once you have submitted a work order, the waiting period begins. After this period, your project is assigned to an SDG&E planner who will come to your Point Loma home and assess the area.
The planner will then send a detailed work order with the specific requirements for your panel upgrade, including:
Panel location
Conduit size
Clearances
Meter height
Trenching route and depth (underground service only)
Step 3: Apply For a City Permit (City of San Diego)
After receiving the SDG&E work order, you must contact the City of San Diego and apply for a permit. Point Loma falls under the jurisdiction of the City of San Diego for all building and electrical permits.
A CITY PERMIT IS ALWAYS REQUIRED when upgrading an electrical panel in Point Loma.
There are many so-called electricians who will quote you a much lower price and tell you that a permit is not necessary. If you come across one of these unprofessional contractors, do not hire them.
Obtaining a permit for an electrical panel upgrade in Point Loma is a straightforward process. Not sure how to handle permits? 📞 Call Landers Electric today at (760) 690-7517 or Text Us Anytime. We pull all required City of San Diego permits and handle all the paperwork for you.
Step 4: Schedule a Pre-Meet With the Trench Inspector (Underground Service Only)
If your Point Loma home has an underground electrical service, you must schedule a pre-meet with an SDG&E trench inspector before any digging begins. This meeting ensures that the new underground conduit will be installed according to SDG&E standards.
It is important to call Dig Alert (811) before scheduling this meeting. The work area must be marked with white paint before Dig Alert arrives. You will not be able to schedule the meeting without a Dig Alert reference number.
Step 5: Dig Trench and Install Conduit (Underground Service Only)
Once the trench inspector has provided the necessary direction, construction can begin. The trench is excavated and approximately 90 percent of the conduit is installed. The final 10 percent, which is the portion that enters SDG&E's handhole or transformer, is installed by a utility contractor after the second trench inspection.
Step 6: Trench Inspection and Backfill (Underground Service Only)
After 90 percent of the conduit is in place, the trench inspector returns for a second approval. Once cleared, an SDG&E crew completes the conduit installation. The electrical contractor then backfills the trench and repairs any driveway, sidewalk, or street that was disturbed during digging. A final trench inspection is required before the project can proceed.
Step 7: Schedule Disconnect and Reconnect
Steps 7 through 12 apply to both overhead and underground services.
The disconnect and reconnect date is the day the old electrical panel will be removed and the new one installed. This is scheduled by contacting the SDG&E service coordinator. The City of San Diego must also be notified so they can schedule their inspection for the same day.
Step 8: Utility Company Power Disconnection
On the day of your electrical panel upgrade, an SDG&E crew will arrive early in the morning to disconnect power.
Important: Approximately three days before the scheduled disconnection date, call Dig Alert (811) to have all existing utilities marked, including gas, water, AT&T, Cox Cable, and others.
Step 9: Install Grounding and Bonding System
The National Electrical Code requires proper grounding and bonding on all new electrical panels.
This includes:
Two ground rods driven eight feet into the ground
Cold water bond
Electrical panel connection
Proper grounding is required by the NEC. If you would prefer to leave this to a licensed professional, 📞 Call Landers Electric today at (760) 690-7517 or Text Us Anytime.
Step 10: Electrical Panel Removal and Installation
THIS STEP CAN ONLY BE COMPLETED ONCE SDG&E HAS DISCONNECTED THE POWER.
Once power is disconnected, the old panel is removed and the new panel is installed. For overhead service in Point Loma, a new riser and weatherhead will be installed at least 24 inches above the roof for the utility connection.
After the installation is complete, the City of San Diego inspector will visit the site to verify that everything is in compliance with the National Electrical Code. Once the inspection is approved, SDG&E will restore power to the property.
Step 11: Repair Stucco or Siding
Removing an electrical panel requires cutting into the stucco or siding of your Point Loma home. All repairs must be completed before a final inspection can be scheduled. These repairs can be handled by Landers Electric or coordinated with another contractor.
Step 12: Pass Final Inspection
The final inspection by the City of San Diego is the last milestone in the panel upgrade process. The stucco or siding must be repaired, the waterproofing restored, and the affected area painted before the inspection can be passed.
Once the final inspection is approved, the electrical panel upgrade is complete!
When you hire Landers Electric, we stay on the job until the City of San Diego inspection is passed and your power is safely restored. 📞 Call Landers Electric today at (760) 690-7517 or Text Us Anytime.
Frequently Asked Questions About Electrical Panel Upgrades in Point Loma, CA
What are the signs I need an electrical panel upgrade in Point Loma?
Common signs include flickering lights, frequently tripping breakers, a burning smell coming from the panel, or if you are planning to add a new appliance that requires more power, such as an EV charger, hot tub, or air conditioning unit.
How much does an electrical panel upgrade cost in Point Loma, CA?
In Point Loma, a standard overhead service panel replacement typically ranges from $3,500 to $5,500. Underground service upgrades, which require trenching, range from $7,000 to $20,000 depending on the complexity of the project. Contact us for an accurate quote.
Does the City of San Diego require a permit for a panel upgrade in Point Loma?
Yes. Point Loma falls under the City of San Diego, and a permit is required for all electrical panel upgrades. Landers Electric handles all permit applications and coordinates with both the city inspector and SDG&E on your behalf.
How long does an electrical panel upgrade take in Point Loma?
Most standard panel upgrades can be completed in a single day. However, the full process, including the SDG&E service change, permits, and inspections, can take several weeks from start to finish.
Is a 100-amp panel enough for my Point Loma home?
For most modern homes in Point Loma, a 100-amp panel is no longer sufficient. A 200-amp panel is now the industry standard, as it can handle the demands of modern appliances, air conditioning systems, and EV chargers without issue.
Can I install an EV charger at my Point Loma home without a panel upgrade?
It depends on your current panel capacity. Many Point Loma homes, especially older ones, require a panel upgrade before a Level 2 EV charger can be safely installed. In most cases, we can assess your panel's capacity over the phone.
Do you pull permits for electrical panel upgrades in Point Loma?
Yes. Landers Electric handles all required City of San Diego permits and SDG&E work orders, so you do not have to.
Are you licensed and insured to work in Point Loma, CA?
Yes. Landers Electric holds a California C-10 Electrical Contractor License #1089091 and carries full general liability insurance. We follow all NEC and CEC codes on every job.
Do you offer emergency electrical services in Point Loma?
Yes. We are available 24 hours a day, Monday through Saturday, for emergency electrical calls in Point Loma and the surrounding San Diego area.
How quickly can you respond to a call in Point Loma?
We often provide same-day service in Point Loma for urgent electrical issues. Response times vary depending on availability.
About the Author
Stephan Landers is a California C-10 Electrical Contractors License holder (CSLB License #1089091) and the founder of Landers Electrical Contracting Inc. With over 20 years of experience, he is dedicated to providing expert advice and quality electrical services in San Diego. You can view his professional licenses and certifications here: About Stephan Landers
Proud Member of the North San Diego County Chamber of Commerce
About Stephan Landers
Need Help With Your Electrical Panel Upgrade in Point Loma?
If you need a licensed professional to handle your electrical panel upgrade in Point Loma, do not hesitate to reach out.
At Landers Electric, we take pride in completing every panel upgrade safely, in full compliance with local codes, and on time, giving you complete peace of mind that the job is done right.